About this item
- Easy breathing, well protect against dust, spit spray, becterias, particles, droplets etc..
- The innermost materials are widely used for baby diaper and give you a supreme soft feel. Our products provide a comfortable, softness fit for sustained use with no discomfort or irritation to your face skin.
Polypropylene, Polyester
Designed To Fit Most Faces Comfortably And Accommodate The User’S Facial Movements
Multilayered Absorption Media With A Smooth Inner Lining For Added Comfort
Latex Free, Comfort Stretch Head Straps Are Welded For A Secure Fit
Concealed, Adjustable Nose Clip Help Provide A Custom Secure Seal
- Melifluo996 FFP3 Protective Respirator incorporates 5-layer effective protection with advanced 3D shaped design to promote greater wearer comfort and increased wearing duration. The core layers use advanced melt blown technology to increase filtration and minimize breathing resistance. Melifluo996 FFP3 has more than 99% oil & non-oil filtration efficiency and helps to filter out fine dust, pollen, and over 99% particles in the air to protect the wearer against both small particle aerosols and large droplets of bodily or other hazardous fluids.
-
- Usage and Storage
Intended For Use:
For daily use, such as personal care, housework, painting, crafts, traveling, running, cycling, hiking, skiing and other outdoor activities.
Wearing Duration: Less than 8 hours is recommended.
Applicable: General public
Components: Respirator body, nose clip,
headband.
Storage Condition: The product should be stored in a well ventilated, dark and dry environment. Keeping away from fire, pollutants and possible pollution sources. Also, the transport storage’s temperature:-20℃(~-4℉) to +40℃(~104℉), relative humidity: less than 80%.
- Shelf Life: 3 years from date of production.
- Transportation Condition: When transporting this product use original packaging provided, see information supplied by the manufacturer.
- Wearing Steps
WEARING STEPS
1. Unfold the respirator and allow headbands to hang freely below your hand.
2. Position the respirator with the bottom under your chin and the nosepiece across the bridge of your nose. Pull the top strap.
3.Locate the upper strap across the crown of the head and the lower strap below
the ears.
4.Make sure straps must not be twisted.
5.Place your fingertips from both hands at the top of the nosepiece. Using two
hands, mold the nose area to the shape of your nose by pushing inward while
moving your fingertips down both sides of the nosepiece. Pinching the
nosepiece using one hand may result in improper fit and less effective respirator
performance (Use two hands).
6.Perform a User Seal Check. To check the respirator-to-face seal, place both
hands completely over the respirator and exhale. Be careful not to disturb the
position of the respirator. If air leaks around nose, readjust the nosepiece as
described in step 3. If air leaks around the respirator edges, adjust position of
straps and make certain respirator edges fit snugly against the face.
If you CANNOT achieve a proper seal. DO NOT enter the contaminated area.
- Warnings
Warnings and Use Limitations:
· Make sure that the respirator is in good condition prior to use. Examine all the respirator parts for signs of damage including the two straps, nose clip, and respirator body. The respirator should be disposed of immediately upon observation of damaged or missing parts.
· Dispose of used product in accordance with applicable regulations.
· Leakages may occur if facial hair passes under the face seal.
· Do not use the respirator under low air quality conditions or oxygen deficiency.
· Do not use the respirator in explosive atmosphere.
· Not suitable for working places where open flames exist (such as welding, casting, and so on)
· The product is non-sterile. Do not use when sterile is required.
· The respirator is only for single use. Do not use repeatedly.